ar2760d6628a

Removing and installing selector lever including bearing bracket

Type ar · emne 27.60 · version 0106 · 2007-05-22

Gælder for: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 TRANSMISSION 722.376 in MODEL 902.0 /0, 903.0, 904.0

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring — Serie 901 (modeller 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 4**)

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 901 (modeller 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 4**)

Gælder også for motorer/gearkasser: 722 330, 722 375, 722 376

AR27.60-D-6628A

Removing and installing selector lever including bearing bracket

16.2.96

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4

TRANSMISSION 722.376 in MODEL 902.0 /0, 903.0, 904.0

Removing and installing selector lever including bearing bracket

D27.60-0002-09

Removal, installation

1

Pull off boot (1) on underbody.

2

Unhook control cable (2).

3

Pull off boot (3) on selector lever.

4

Disconnect 1st gear connector (arrows).

1st gear switches no longer used

Model designation 901.0/4 902.0/4 903.0/4 904.0/4
as of VIN 689837

BT27.19-N-0002-01A

5

Unscrew bolts (4) and remove selector lever with bearing bracket (5).

*BA27.60-N-1001-02A

6

Install in reverse order

Floor selector

Number

Designation

Transmissions 722.375/376

BA27.60-N-1001-02A

Bolt, selector lever bearing bracket on body

Nm

25

Henviste dokumenter