ar2760d1475a

Setting selector lever control cable

Type ar · emne 27.60 · version 0103 · 1999-08-23

Gælder for: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring — Serie 601 (modeller 943) · Serie 602 (modeller 980) · Serie 901 (modeller 06*, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 4**)

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 601 (modeller 943) · Serie 602 (modeller 980) · Serie 901 (modeller 06*, 3**, 4**) · Serie 902 (modeller 0**, 3**, 4**) · Serie 903 (modeller 0**, 3**, 4**) · Serie 904 (modeller 0**, 4**)

Gælder også for motorer/gearkasser: 111 979, 722 330, 722 375, 722 376

AR27.60-D-1475A

Setting selector lever control cable

26.9.97

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

Setting selector lever control cable

D27.60-0001-06

1 Clamping bolt

2 Control cable

3 Range selector lever

Adjusting

1

Place selector lever in position "2".

2

Loosen bolt (1) on clamping bore

3

Unhook control cable (2) from range selector lever (3) and place range selector lever in position "2"

4

Slide control cable (2) through the clamping bore until it can be hooked into the range selector lever (3)

5

Tighten bolt (1) on clamping bore.

*BA27.60-N-1002-05B

Shift mechanism, control

Number

Designation

Transmissions 722.330/337

Transmissions 722.332/375/376

BA27.60-N-1002-05B

Clamping bolt, selector lever control cable to transmission housing

Nm

1

1