ar2760d010001a
Detaching, attaching shift cable at automatic transmission
Type ar · emne 27.60 · version 0106 · 2003-09-15
Gælder for: TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 with CODE (G40) Automatic transmission TRANSMISSION 722.681 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.60 Gearskifte, styring — Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)
EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)
Gælder også for motorer/gearkasser: 722 681
AR27.60-D-0100-01A
| Detaching, attaching shift cable at automatic transmission
|
|
|
1 Unlatch ball socket latch (1) of cable.
2 Unclip Bowden cable retainer (2) from retainer panel.
When pulling out cable, press together hooks of Bowden cable retainer at the points shown (arrows).
3 Pull Bowden cable out of ball socket.
Ball socket can remain on transmission lever.
4 Hook in in opposite order.
Installation: push selector lever at transmission forwards as far as the stop.
