ar2750s060101ps
Remove grooved ball bearing in rear transmission housing
Type ar · emne 27.50 · version 0100 · 2018-06-06
Gælder for: Transmission 722.9 in model 470, 471 with engine 642
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.50 Hjulsæt — Serie 470 · Serie 471
EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 470 · Serie 471
Gælder også for motorer/gearkasser: 642 ***, 722 9**
AR27.50-S-0601-01PS
| Remove grooved ball bearing in rear transmission housing
|
|
|
Transmission
| 722.9 in model 470, 471 with engine 642
|
1
| Remove the grooved ball bearing retaining ring.
|
2
| Screw collet into puller and tighten.
|
3
| Position puller over the bearing inner race.
|
4
| Turn upper part of puller counterclockwise (arrow) and thus clamp collet (picture A).
|
5
| Remove deep-groove ball bearing from transmission housing (picture B).
|
