ar2750s060101e
Remove grooved ball bearing in rear transmission housing
Type ar · emne 27.50 · version 0200 · 2016-04-30
Gælder for: Model 447 with engine 651 with transmission 722.9 Model 447, 448 with engine 274 with transmission 722.9
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.50 Hjulsæt — Serie 447 · Serie 448 · Serie 651
EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 447 · Serie 448 · Serie 651
Gælder også for motorer/gearkasser: 274 ***, 722 9**
AR27.50-S-0601-01E
| Remove grooved ball bearing in rear transmission housing
|
|
|
Model
| 447 with engine 651 with transmission 722.9
|
Model
| 447, 448 with engine 274 with transmission 722.9
|
06.04.2016
| Retaining ring pliers commercially available tool added
| Operation step 1
|
|
1
| Remove the grooved ball bearing retaining ring.
|
|
| Commercially available devices/tools
Circlip pliers
|
2
| Screw collet into puller and tighten.
|
3
| Attach puller over the bearing inner race.
|
4
| Clamp collet (picture A).
|
|
| To do so, turn the upper part of the puller counterclockwise (arrow).
|
5
| Remove the grooved ball bearing from the transmission housing (picture B).
|
