ar2750d060101tsc
Remove grooved ball bearing in rear transmission housing
Type ar · emne 27.50 · version 0200 · 2020-01-02
Gælder for: Transmission 725.0 in model 907
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.50 Hjulsæt — Serie 907
EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 907
Gælder også for motorer/gearkasser: 725 0**
AR27.50-D-0601-01TSC
| Remove grooved ball bearing in rear transmission housing
|
|
|
Transmission
| 725.0 in model 907
|
02.12.2019
| Special tool 000 589 52 37 00 Pliers, added.
| Operation step 1
|
|
1
| Remove retaining ring of deep-groove ball bearing using pliers.
|
2
| Screw collet (1) into puller (2).
|
3
| Position puller (2) over the bearing inner race.
|
4
| Turn upper part of puller (2) in counterclockwise direction (arrow).
|
|
| This then tensions the collet (1).
|
5
| Remove deep-groove ball bearing from transmission housing.
|
