W27.45-1003-11
1 Hose line
2 Seal
3 Power take-off (installation position 8.00 o'clock)
4 Connector
5 Seal
W27.45-1002-11
1 Hose line
2 Seal
3 Power take-off (installation position 3.00 o'clock)
4 Connector
5 Seal
Modification notes
| Remove/install | ||
1 | Drain fluid from transmission. | ||
| Automatic transmission - oil and filter change | ||
2.1 | Detach or remove drive for ancillaries. | Depending on ancillaries | |
2.2 | Remove the hydraulic pump. | Do not separate hydraulic lines if possible, collect hydraulic fluid if necessary. | |
3 | Disconnect the hose line (1) from the power take-off. | Installation: Install new sealing rings (2). | |
| |||
4 | Unplug connector (4). | ||
5 | Remove the power take-off (3). | Installation: Replace gasket (5) . The arched seal edge should face towards the power take-off. Use guide bolts. | |
| |||
6 | Install in the reverse order. | ||
7 | Fill transmission with oil | ||
| Automatic transmission - oil and filter change |
Automatic transmission - complete
Henviste dokumenter
- ap2700w2702a Automatgearolie- og oliefilterskift