ar2740l0310va

Removing and installing radial shaft seal for torque converter housing

Type ar · emne 27.40 · version 0100 · 2003-03-13

Gælder for: TRANSMISSION 722.750 /751 in MODEL 414.700

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.40 Hus — Serie 414 (modeller 700)

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 414 (modeller 700)

Gælder også for motorer/gearkasser: 722 750, 722 751

AR27.40-L-0310VA

Removing and installing radial shaft seal for torque converter housing

12.7.01

TRANSMISSION 722.750 /751 in MODEL 414.700

Removing and installing radial shaft seal for torque converter housing
Removing and installing radial shaft seal for torque converter housing

P27.40-0245-01

1 Radial shaft seal

025 Dorn

P27.40-0246-01

Removing, installing

1

Remove transmission with torque converter

AR27.10-L-0500VA

2

Fasten transmission on assembly stand

AR27.10-P-0600-01GC

3

Press radial shaft seal (1) out of torque converter housing using a suitable tool.

Installation: Drive radial shaft seal (1) into torque converter housing as far as the stop using drift (025). Coat sealing lip of radial shaft seal with transmission oil.

*168589101500

4

Install in the reverse order

Removing and installing radial shaft seal for torque converter housing

168 589 10 15 00

Drift

Henviste dokumenter