ar2740d070002tsc
Remove/install heat shield on transmission
Type ar · emne 27.40 · version 0100 · 2018-10-15
Gælder for: Transmission 725.0 in model 907
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.40 Hus — Serie 907
EinPAS 35 Karrosseri/ramme/monteringsdele › 35.25 dæmpningselement/afdækning forneden/tætning/undervognsbeklædning › 35.25.40 Dæmpning/afskærmning/isoleringsmåtte — Serie 907
Gælder også for motorer/gearkasser: 725 0**
AR27.40-D-0700-02TSC
| Remove/install heat shield on transmission
|
|
|
Caution
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts
| Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
| AS00.00-Z-0017-01A
|
Transmission
| 725.0 in model 907
|
1
| Unscrew screw (1) and remove heat shield (2) downward.
|
|
| Installation: Push the heat shield (2) under the leaf spring (3).
|
2
| Remove screw from leaf spring (3) and take off leaf spring (3).
|
|
| When replacing the transmission.
|
3
| Install in the reverse order.
|
Henviste dokumenter
- as0000z001701a Fare for personskade på grund af snitsår eller hudafskrabninger grundet
skarpkantede køretøjsdele
