ar2719s0900b

Remove/install inductive sensor (turbine rpm)

Type ar · emne 27.19 · version 0107 · 2009-11-17

Gælder for: ENGINES 601.970, 111, 611.980 in MODEL 638 with CODE (G40) Automatic transmission transmission removed

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.19 El-system gearkasse — Serie 601 (modeller 970) · Serie 611 (modeller 980) · Serie 638

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.12 Sensor/kontakt/ledningssæt — Serie 601 (modeller 970) · Serie 611 (modeller 980) · Serie 638

Gælder også for motorer/gearkasser: 111 ***

AR27.19-S-0900B

Remove/install inductive sensor (turbine rpm)

10.11.09

ENGINES 601.970, 111, 611.980 in MODEL 638 with CODE (G40) Automatic transmission
transmission removed

Remove/install inductive sensor (turbine rpm)

S27.19-2008-11

1 Torx screw

B92 Inductive sensor

B92.1 Inductive sensor connector

Remove/install

Make sure everything is absolutely clean, use lint-free rags only

Risk of damage through contamination in transmission

1

Remove automatic transmission oil pan

2

Unscrew Torx bolt (1)

Ensure that the Torx screw (1) does not fall into the transmission

*BA27.19-N-1002-02A

3

Remove inductive sensor (B92) and detach connector (B92.1)

Use screwdriver to lift up shackle (arrow) until the connector (B92.1) can be detached.
Installation: Shackle (arrow) must engage securely into journal of inductive sensor (B92)

4

Install in the reverse order

Electrical system, transmission

Number

Designation

Model 638 with Series 111, 601.970, 611.980 engine

BA27.19-N-1002-02A

Inductive sensor (turbine rpm) to transmission

Nm

8