Removing and installing program switch

Type ar · emne 27.19 · version 0101 · 1999-10-01

Gælder for: TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (G40) Automatic transmission W4A028 with CODE (GS4) Tip shift for automatic transmission TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (G40) Automatic transmission W4A028 with CODE (GS4) Tip shift for automatic transmission

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.19 El-system gearkasse — Serie 601 (modeller 943) · Serie 602 (modeller 980) · Serie 903 (modeller 312, 362, 462, 463)

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.12 Sensor/kontakt/ledningssæt — Serie 601 (modeller 943) · Serie 602 (modeller 980) · Serie 903 (modeller 312, 362, 462, 463)

Gælder også for motorer/gearkasser: 722 332, 722 337

AR27.19-D-0500A

Removing and installing program switch

9.12.97

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980
with CODE (G40) Automatic transmission W4A028
with CODE (GS4) Tip shift for automatic transmission

D27.19-0017-05

Program switch shown on models 903.312/362

1 Detaching hoop

2 Program switch, automatic transmission S4

3 Attachment plug S4.1, 22-pin

4 Attachment plug S4.2, 10-pin

	Removing
1	Push in detaching hoop (1) up to the stop
2	Press detaching hoop outwards and pull out program switch S4 (2)
3	Disconnect attachment plug S4.1 (3) and S4.2 (4)
	Installing
1	Plug in attachment plug S4.1 (3) and S4.2 (4)
2	Push in program switch S4 (2).