Removing and installing starter lockout switch on automatic transmission

AR27.19-D-0240A

16.2.96

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office

TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) Fedex supply

D27.10-0014-09

1 Starter lockout switch

2 Hexagon bolt

3 Range selector lever

6 Hexagon bolt

7 Control cable

4 Hexagon nut

5 Washer

 	Removal, installation
1	Unhook control cable selector lever (7) on range selector lever (3)		AR27.60-D-0100-02A
2	Remove plug on starter lock-out switch (1).	 Turn locking device upwards (arrow) and using two screwdrivers carefully press off the plug at the cable entrance and lug opposite (arrows)
3	Unscrew hexagon bolt (6) with washer (5) and nut (4) and remove range selector lever (3).	 Installation: Mount range selector lever (3), the driver (arrow) must engage in the range selector lever.
			*BA27.60-N-1001-05B
4	Unscrew hexagon bolts (2) and remove starter lock-out switch (1).	 Installation: Do not tighten hexagon bolts (2).
5	Install in reverse order.	 Installation: Adjust starter lockout switch.	AR27.19-D-0240-01A
			*BA27.60-N-1001-05B

 Shift mechanism, control

Number	Designation		Transmissions 722.330/337	Transmissions 722.332/375/376


BA27.60-N-1001-05B	Clamping screw, range selector lever on shaft	Nm	8	8