Fasten removed transmission to assembly stand

AR27.10-D-0600-01TS

Fasten removed transmission to assembly stand

Model

907 with transmission 722.9

1

 Bolt on support plate (H) at threaded holes (B1, B2, B3) to  assembly stand (B).

2

Mount automatic transmission onto  support plate (H) and line up holes (G1, G2, G3) of torque converter housing (1w) with threaded holes (H1, H2, H3) of  support plate (H).

 After positioning, secure the automatic transmission to prevent it from tilting and slipping off.
Otherwise damage may occur.

 A helper is required.

3

Bolt on torque converter housing (1w) at threaded holes (H1, H2, H3) to  support plate (H).

 A helper is required.