ar2710d050203a
Align torque converter and driving plate
Type ar · emne 27.10 · version 0105 · 2003-09-15
Gælder for: TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6 with CODE (G40) Automatic transmission TRANSMISSION 722.681 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 27 Automatgearkasse › 27.10 Gearkasse komplet — Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)
EinPAS 17 Drivstreng/aksel › 17.15 Kobling › 17.15.31 hydraulisk kobling — Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**) · Serie 905 (modeller 6**)
Gælder også for motorer/gearkasser: 722 681
AR27.10-D-0502-03A
| Align torque converter and driving plate
|
|
|
1 Move torque converter housing (1) to shown position.
Check position of torque converter through housing opening (2) when installing transmission.
2 Move driving plate (3) also to shown position.
Check position of driving plate through opening on back of engine flange when installing transmission.
The grooves of the driving plate must be aligned opposite the mounting brackets on the torque converter housing when installing the transmission.
