Shown on model 639 without CODE XZ1 (Model generation 1) |
2 | Shift cable ball socket |
3 | Adjustment tool |
5 | Selector lever with bearing bracket |
6 | Bolts |
N27.60-2069-11
| Remove | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
1 | Remove selector lever handle with covering | ||
2 | Remove center console | ||
3 | Remove trim on center console | ||
4 | Remove screws (6) and remove selector lever with bearing bracket (5) downwards out of guide | ||
5 | Use suitable tool to unclip shift cable ball socket (2) from ball head on selector lever with bearing bracket (5) | ||
Adjust | |||
6 | Insert adjustment tool (3) into shift cable | ||
| Adjustment tool for shift cable length adjuster | ||
7 | Clip shift cable ball socket (2) into ball head on selector lever with bearing bracket (5) | Grease ball head and shift cable ball socket (2). | |
Long-life grease | |||
8 | Insert selector lever with bearing bracket (5) from below into guide and tighten screws (6) | Apply thread locking compound to thread of screws (6). | |
Gearshift bracket to bulkhead support | |||
Quick-acting adhesive, Loctite 270 | |||
9 | Move selector lever to position "D" | ||
10 | Detach adjusting tool (3) from shift cable | ||
11 | Check gearshift system for proper operation and ease of movement | If necessary, repeat adjustment procedure. | |
| Install | ||
12 | Install trim on center console | ||
13 | Install center console | ||
14 | Install selector lever knob with cover |
Henviste dokumenter
- ah0000z030001a Generelle oplysninger ved køretøjer med højvoltsnet og/eller litium-ion-batteri og/eller gasdrivsystem samt personligt beskyttelsesudstyr
- ar2760s010003s Indsættelse af indstillingsværktøj i længdeindstilling gearkabel
- ar2760s0905s
- ar6820s2000s
- ar6820s5169s
- as0000z003501a Livsfare ved arbejde på komponenter og systemer med U >= 30 V vekselspænding (AC) eller U >= 60 V jævnspænding (DC)
- wf5850s266004s