Shown on transmission 716.6 |
1 | Ball socket |
2 | Shift cable |
4 | Locking plate |
5 | Bracket |
6 | Rubber grommet |
S26.60-4500-06
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger ! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove | ||
1 | Remove rear lower engine compartment paneling |
| |
2 | Detach ball sockets (1) from ball heads on transmission using a suitable tool | ||
3 | Detach shift cables (2) from bracket (5) using a suitable tool | Cut cable tie if necessary. | |
4 | Detach gearshift lever with bearing bracket | ||
5 | Detach rubber grommets (6) from body | ||
6 | Remove shift cables (2) upwards | Cut cable tie if necessary. | |
| Install | ||
7 | Insert shift cables (2) | If necessary, replace cable ties. Pay attention to correct routing of shift cables (2). | |
8 | Attach rubber grommets (6) to body | Make sure that the rubber grommets (6) are seated correctly. | |
9 | Attach ball sockets (1) to ball heads on transmission | Grease ball heads on transmission and ball sockets (1). | |
Long-life grease | |||
10 | Attach shift cables (2) to bracket (5) | If necessary, replace locking plate (4) and replace cable tie. | |
11 | Adjust shift cables (2) | ||
Do not install the gearshift lever with bearing bracket completely yet. | |||
12 | Replace cable tie | ||
13 | Install gearshift lever with bearing bracket | ||
14 | Install rear lower engine compartment paneling |
|
Henviste dokumenter
- ar2660s6604sd
- ar2660s6633sd Indstilling af gearkabel manuel gearkasse
- ar6120s110503s
- as0000z000201a Fare for personskade på hud og øjne ved håndtering af varme eller glødende genstande
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.