AR26.60-S-6602S | Remove/install boot at gearshift lever | 17.12.10 |
TRANSMISSION 716.6 in MODEL 636, 639
TRANSMISSION 711.6 in MODEL 639
S26.60-4505-10
Shown on original equipment boot (1)
1 Boot
3 Trim
4 Rubber
5 Gearshift lever
S26.60-4506-10
Shown on repair boot (2)
2 Repair boot
3 Trim
4 Rubber
5 Gearshift lever
6 Zipper
| Removing | ||
| Notes on carrying out repair work in the vehicle interior | ||
1 | Unclip boot (1) or repair boot (2) from lining (3) | ||
2 | Remove rubber (4) on gearshift lever (5) | ||
3.1 | Cut open boot (1) | Not in the case of repair boot (2) | |
3.2 | Open Velcro lock (6) on repair boot (2) | Only in the case of repair boot (2) | |
4 | Remove boot (1) or repair boot (2) | ||
| Install | ||
5 | Install repair boot (2) on gearshift lever (5) | To do this, close Velcro lock (6) on repair boot (2) and pay attention to the correct position of the repair boot (2). | |
6 | Install rubber (4) on gearshift lever (5) | To do this place the rubber (4) in an inverted position over the gearshift lever (5) and pay attention to the correct position of the rubber (4). | |
Long wedge | |||
7 | Clip the repair boot (2) into the lining (3) |
Long wedge
115 589 03 59 00
Henviste dokumenter
- ah6800n000101s Oplysninger om udførelse af reparationsarbejde i kabinen