1 | Center console cover |
2 | Shift cable |
2H | Rear section of quick-fit connector |
2V | Quick-fit connector |
3 | Shift cable |
3H | Rear section of quick-fit connector |
3V | Quick-fit connector |
4 | Floor-mounted shift |
5 | Nut |
P26.60-A001-06
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Remove center console cover (1). | ||
2 | Detach shift cable (2) and shift cable (3) from center shifter console (4). | ||
3 | Pull back rear sections of quick-fit connectors (2H, 3H) (see arrows) and remove shift cable (2) or shift cable (3) upwards out of holders of center shifter console (4) then place to one side. | ||
4 | Unscrew nuts (5) and remove center shifter console (4) upwards. | ||
5 | Install in the reverse order. | ||
6 | Adjust shift cable (2) and shift cable (3). | When replacing the center shifter console (4). | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform engine test run and check operation of gearshift system. |
Henviste dokumenter
- ah0000n000101a Oplysninger om selvlåsende bolte og møtrikker
- ar2660p0635mfa
- ar6820p2350mfa
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører