AR26.60-G-0010GA | Remove/install shift forks and shift rails | 14.7.10 |
TRANSMISSION 714.100 /120 in MODEL 000.001
T26.60-0016-06
1 Retainer
2 Reverse gear shift fork
3 1st and 2nd gear shift fork
4 3rd and 4th gear shift fork
5 5th and 6th gear shift fork
6 Reverse gear shift rail
7 1st and 2nd gear shift rail
8 3rd and 4th gear shift rail
9 5th and 6th gear shift rail
10 Sliding block
| Remove/install | ||
1 | Remove rear transmission housing | ||
2 | Pull out retainer (1) of reverse gear shift rail (6) | ||
3 | Remove reverse gear shift fork (2), 1st and 2nd gear shift fork (3) and 3rd and 4th gear shift fork (4) | ||
4 | Remove both bearing bolts of the 5th and 6th gear shift fork (5) from the front transmission housing | Installation: Either replace the bearing pins (if thread is micro-encapsulated) or coat the thread with quick-acting adhesive. | |
| |||
5 | Remove 5th and 6th gear shift fork (5) | ||
6 | Remove shift rail guide | If the shift mechanism is already removed, the shift rail guide does not have to be removed. | |
7 | Remove reverse gear shift rail (6), 1st and 2nd gear shift rail (7), 3rd and 4th gear shift rail (8) and 5th and 6th gear shift rail (9) | ||
8 | Pull out all sliders (10) | Installation: Pay attention to correct seat of sliders (10). Oil the sliders (10) lightly. | |
9 | Clean all parts and check for wear, renew if necessary. | ||
10 | Install in the reverse order |
Shift mechanism
Number | Designation | Trans-mission 714.100 | Trans-mission 714.120 | |
BA26.60-N-1003-01E | Shift fork bearing pin in transmission housing | Nm | 120 | 120 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1008-02A | Quick-acting adhesive, Loctite 270 | A 002 989 93 71 |