Remove/install shift lever boot

Type ar · emne 26.60 · version 0101 · 2018-05-16

Gælder for: Transmission 711.680/683 in model 909

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.60 Gearskifte — Serie 909

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.30 skiftemodul/gearvælger/gearskiftestang/gearkabel — Serie 909

Gælder også for motorer/gearkasser: 711 680, 711 683

AR26.60-D-6620R

Remove/install shift lever boot

04.05.2018

Transmission

711.680/683 in model 909

1	Gearshift lever boot
2	Cable tie

D26.60-0020-12

Topical note	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
 	Remove/install
1	Unclip gearshift lever boot (1) from panel (arrows) and roll upwards.
2	Disconnect cable tie (2) and remove.	 Installation: Replace cable tie (2).
3	Remove gearshift lever boot (1).
4	Install in the reverse order.