ar2660b0009ba

Check and correct hydraulic oil level

Type ar · emne 26.60 · version 0108 · 2020-03-06

Gælder for: Transmission 715.062 in model 384

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.60 Gearskifte — Serie 384

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.80 Gearkasse komplet — Serie 384

Gælder også for motorer/gearkasser: 715 062

AR26.60-B-0009BA

Check and correct hydraulic oil level

08.01.2020

Transmission

715.062 in model 384

Check and correct hydraulic oil level

The image shows the 715.050 gearbox

1

Cover

2

Oil reservoir's upper side (maximum level of the liquid)

3

Oil reservoir's bottom side (minimum level of the liquid)

W26.60-1142-05

Inspect

Warning

Risk of injury to hands or eyes when working on hydraulic pressure reservoir systems caused by hydraulic fluid to specification 345.0 spraying out under pressure

Depressurize hydraulic pressure reservoir system before commencing work on system. Wear protective gloves and safety glasses.

AS00.00-Z-0028-01A

1

De-pressurize the automatic gear shift control pressure accumulator (AGS)


.

AR26.10-B-0020-06BA

Depressurization is to be carried out preferably with Star Diagnosis, because the system may have up to 90 bar of pressure and the mechanic depressurization is an additional source of danger.

.Pressure relief valve fastening

*BA26.60-B-1004-02A

2

Inspect and correct the hydraulic oil level, if necessary

Before checking the hydraulic oil level at the reservoir, wait for approximately 5 min, as when the hydraulic oil pressure is removed, it foams as established in page 345.0.

The hydraulic oil level, when not under pressure, must always stay between the upper part of the oil reservoir's seam (2) and the bottom side of the oil reservoir seam (3).

Automatic gear control (AGS)

Number

Designation

Gearboxes 712.62, 712.63, 715.05, 715.06

BA26.60-B-1004-02A

Pressure relief valve fastening

Nm

8

Henviste dokumenter