Remove and install gearshift system

AR26.60-B-0001TAA

Remove and install gearshift system

12.02.16



Remove

 Danger!

Risk of injure to skin and eyes due to handling of hot or incandescent objects

Wear protective clothes and goggles

AS00.00-B-0002-01A

1

Remove screw (1)

 Previously heat gearbox carcass on the screw area (1) with a hot air gun.

2

Remove cover (2)

 Place stick shift on neutral position and press it against the gearbox carcass to the jamb. Use a plastic hammer on the command lever until the cover (2) leaps out.

3

Remove electrical connector of the reverse gear switch (S7)

4

Remove command carcass (3) with command axle (10)



Install

5

Secure lock bar (9) of the command lock in a way it doesn't flip over the command axle (10), using the assembling device (8)

 Assembling device

*715589023100

6

Install command carcass (3) with command axle (10)

 Clean sealing surfaces and apply sealing product.

*BR00.45-B-1029-02B

 Insert command axle (10) into the gearbox carcass until the lock bar (9) is fixated, then withdraw the assembling device (8) and slide the command axle (10) inside.

 Gearbox 712.61/62/63, 715.05/06

*BA26.60-B-1003-01E

7

Install a new screw (1)

 Twist command axle (10) with a hex wrench in a way that the screw (1) fits the slot (arrow) of the command axle.

 Gearbox 712.61/62/63, 715.05/06

*BA26.60-B-1002-01E

8

Install new cover (2)

 Install cover (2) with fast drying adhesive using appropriate mandrel.

*BR00.45-B-1024-02B

Número

Denominação

Gearbox 712.61; 712.62; 712.63; 712.64; 712.65; 715.054, 715.064

BA26.60-B-1002-01E

Safety bolt

Nm

30

BA26.60-B-1003-01E

Shifter fastening bolts to gearbox

Nm

25

Número

Denominação

Número de pedido

BR00.45-B-1024-02B

Loctite 270

Henkel Loctite

BR00.45-B-1029-02B

Surfaces sealing product Loctite 5203

Henkel Loctite