Disassemble/assemble input shaft

AR26.50-T-4744B

Disassemble/assemble input shaft

9.10.06

 

Disassemble/assemble

1

Remove input shaft (1).

AR26.50-T-4743B

 Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

2

Pull tapered roller bearing off input shaft (1)

 Position and tighten gripper (3) on inner race of tapered roller bearing. At puller (4), exchange pipe section for extension (2). Screw puller (4) into gripper (3) and pull tapered roller bearing off input shaft (1).



*001589413300



*000589463400



*714589033400

 Assembling:

Heat the inner race of the tapered roller bearing to approx. 120 °C and push onto the input shaft (1).

3

Remove air flow sensor plate (5)

 Assembling:

Drive the air flow sensor plate (5) all the way onto the input shaft (1).

4

Clean all parts, check for wear and replace parts if necessary

5

Assemble in the reverse order