Disassemble/assemble input shaft

AR26.50-T-4744A

Disassemble/assemble input shaft

9.10.06



Disassemble

1

Disassemble transmission

AR26.10-T-0001A

2

Remove cylindrical roller bearing cage (7)

3

Remove circlip (1).

4

Press compensating ring halves (2) out of groove and remove

5

Pull off cylindrical roller bearing (3) of input shaft (4) together with toothed lock washer (5)



*000589893300



*000589903300

6

Press off flanged washer (6)

 The flanged washer is part of the cylindrical roller bearing inner race.

7

Clean all parts, check for wear and replace parts if necessary.



Assemble

 Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

8

Slide flanged washer (6), cylindrical roller bearing (3) and toothed lock washer (5) in sequence onto input shaft (4)

 Heat up the cylindrical roller bearing, toothed lock washer and flanged washer to approx. 120 °C.

9

Drive compensating ring halves (2) into the groove

10

Install circlip (1).

 After fitting, peen the collar of the circlip over at 3 - 4 points.

11

Fit cylindrical roller bearing cage (7)

12

Assemble transmission

AR26.10-T-0001A