AR26.50-S-4800A | Disassembling, assembling reverse gear shaft | 25.7.96 |
ENGINE 111.948 /978, 601.942 /970 in MODEL 638 except CODE (G40) Automatic transmission
S26.50-3020-05
1 Stop washer
2 Reverse ring gear
3 Needle bearing
4 Sliding sleeve
5 Safety ring
6 Synchroniser body
7 Reverse shaft
| Disassembling, assembling | ||
| A press with a capacity of at least 25t is required to disassemble the shafts | ||
1 | Disassemble transmission | ||
2 | Remove thrust washer (1), reverse gear wheel (2) and needle bearing (3) | ||
3 | Remove shift sleeve (4) | Installation: The groove (arrow) must point towards the reverse gear wheel (2) | |
4 | Remove locking ring (5) | ||
5 | Press shift body (6) off reverse gear shaft (7) | Pressure sleeve | |
Pressing-in sleeve | |||
| Puller plate | ||
6 | Assemble in reverse order |
638 589 04 35 00
638 589 00 35 00
Pressure sleeve
Pressure sleeve
Workshop equipment
WE58.40-Z-1001-12A | Stationary workshop press 65 t |