Serier
da
ar2650g4743oha
Remove/install drive shaft
Type ar · emne 26.50 · version 0100 · 2017-02-06
Gælder for: Transmission 714.140/143 in model 000.001
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.50 Hjulsæt, aksler, differentiale — Serie 000 (modeller 001)
EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.50 Aksel/tandhjul/synkronisering — Serie 000 (modeller 001)
Gælder også for motorer/gearkasser: 714 140, 714 143
AR26.50-G-4743OHA
Remove/install drive shaft
20.01.2017
Transmission
714.140/143 in model 000.001
Shown on transmission without integrated clutch housing
1
Drive shaft
2
Front transmission housing
Remove/install
1
Detach clutch housing from transmission
Only on transmission without integrated clutch housing
AR26.30-G-0330OHA
2
Attach transmission to assembly device
3
Remove rear transmission housing
AR26.40-G-2477OHA
4
Remove shift forks and shift rails
AR26.60-G-0010OHA
5
Remove main shaft and countershaft
AR26.50-G-0001OHA
6
Remove bearing cap of drive shaft (1)
AR26.30-G-1010OHA
7
Turn front transmission housing (2) so that the drive shaft (1) is horizontal and remove drive shaft (1) together with inner race of tapered roller bearing from front transmission housing (2) inwards using a plastic mallet
8
Install in the reverse order
Henviste dokumenter
