714 589 21 63 00
Threaded insert
715 589 03 15 00
Alignment punch
343 589 00 33 01
Extractor
The reverse idler gear (4) can only be removed when the transmission housing rear section is removed. Place reverse idler gear (4) in recess before installing transmission housing rear section.
Remove
1 | Unscrew screw (1) and remove retaining plate (2). |
2 | Screw threaded insert into reverse idler axle (3). |
3 | Position extractor on threaded insert and pull out reverse idler axle (3). |
4 | Remove threaded insert from reverse idler axle (3). |
5 | Push reverse idler gear (4) sideways out of transmission housing rear section. |
G26.50-A010-01
Install
6 | Align reverse idler gear (4) with centering pin. |
7 | Coat reverse idler axle (3) with clean transmission oil and slide into transmission housing rear section. |
Insert reverse idler axle (3) into transmission housing rear section only until groove of reverse idler axle (3) is flush with transmission housing rear section. |
8 | Insert retaining plate (2). |
9 | Screw in screw (1). |
G26.50-A010-01