W26.50-1228-09
Shown is the removal process on transmission 715.523 |
1 | Hollow-piston cylinder | 5 | Main shaft | 69 | Oil restrictor | ||
2 | Extraction and insertion tool |
70 | Oil pipe |
71 | Retaining ring |
72 | Planet carrier |
W26.50-1225-06
| Remove | ||
1 | Remove range group | ||
2 | Assemble hollow-piston cylinder (1) with extraction and insertion tool (2) and screw into oil restrictor (69) | The sleeve of the extraction and insertion tool (2) on the side of the oil restrictor (69) must be positioned so that the collar faces in the direction of the hollow-piston cylinder (1). | |
Hollow piston cylinder | |||
Hydraulic hose (complete) | |||
Hand pump | |||
Extraction and insertion tool | |||
3 | Pull oil restrictor (69) out of main shaft (5) | ||
| Clean | ||
4 | Clean bore in main shaft (5) | Assembly cleaner | |
| Install | ||
5 | Assemble hollow-piston cylinder (1), extraction and insertion tool (2) and oil restrictor (69) | The sleeve of the extraction and insertion tool (2) on the side of the oil restrictor (69) must be positioned so that the collar faces in the direction of the oil restrictor (69). | |
Hollow piston cylinder | |||
Hydraulic hose (complete) | |||
Hand pump | |||
Extraction and insertion tool | |||
6 | Position oil restrictor (69) flush to main shaft (5) and press in | | |
Press-in pressure of oil restrictor in main shaft | |||
7 | Detach hollow-piston cylinder (1) and extraction and insertion tool (2) from oil restrictor (69) | ||
8 | Remove oil pipe (70) and retaining ring (71) from planet carrier (72) | Only when an oil pipe (70) is installed. | |
The oil pipe (70) and the retaining ring (71) are no longer required because of a technical modification. | |||
9 | Install range group |
715 589 03 43 00
Extraction and insertion tool
652 589 00 33 21
Hand pump
001 589 51 33 00
Hollow piston cylinder
652 589 00 33 23
Hydraulic hose (complete)