Remove/install drive shaft

Type ar · emne 26.50 · version 0100 · 2016-02-12

Gælder for: Manual transmission 710.26 with Vehicle 386, 682, 688Manual transmission 710.27 with Vehicle 688, 979

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.50 Hjulsæt, aksler, differentiale — Serie 386 · Serie 682 · Serie 688 · Serie 979

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.50 Aksel/tandhjul/synkronisering — Serie 386 · Serie 682 · Serie 688 · Serie 979

Gælder også for motorer/gearkasser: 710 26*, 710 27*

AR26.50-B-4743J

Remove/install drive shaft

12.02.16

Manual transmission 710.26 with Vehicle 386, 682, 688

Manual transmission 710.27 with Vehicle 688, 979

B26.50-0252-03

1 Fixation screws

2 Input shaft cover

3 Input shaft

4 Gearbox

	Remove and install
1	Unscrew the bolts (1) from the input shaft (3) cover (2), detach it and remove it	Installing: Apply the specified tightening torque.
			*BA26.30-B-1005-01G
2	Remove the input shaft (3) from the gearbox (4).
3	Install in reverse order

Cover

Número	Denominação		Gearboxes 710.271


BA26.30-B-1005-01G	Drive shaft cover fastening bolts	Nm	20...34