ar2650b200201b

Remove/install reverse idler shaft with reverse gear

Type ar · emne 26.50 · version 0100 · 2016-02-12

Gælder for:

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.50 Hjulsæt, aksler, differentiale

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.50 Aksel/tandhjul/synkronisering

Gælder også for motorer/gearkasser: 714 120, 714 124, 714 140, 714 144, 714 183

AR26.50-B-2002-01B

Remove/install reverse idler shaft with reverse gear

Gear set, shafts

Número

Denominação

Gearboxes 714.124/144

BA26.50-B-1003-01G

Bolt securing the retaining plate of the reverse intermediate gear shaft in the gearbox

Nm

58

Remove/install reverse idler shaft with reverse gear
Remove/install reverse idler shaft with reverse gear
Remove/install reverse idler shaft with reverse gear

343 589 00 33 01

Puller

714 589 21 63 00

Adapter

714 589 00 61 00

Mandrel

Remove/install reverse idler shaft with reverse gear

T26.50-0022-01

Remove and install the reverse intermediate gear wheel shaft

1 Unscrew the bolt and remove the retaining plate.

2 Screw the adapter on the intermediate gear wheel shaft.

3 Mount the puller and pull out intermediate gear wheel shaft.

Install: Pull the intermediate gear, but before that, align with the guide mandrel the intermediate gear, the roller bearing and pay attention to the position of the groove of the gear axle with regard to the retaining plate.

Removing and installing reverse gear intermediate gear wheel

4 Push the reverse gear's intermediate gear wheel together with the bushing and roller bearing sideways out of the rear part of the gearbox.

Install: The intermediate gear wheel collar must be positioned toward the input shaft.

5 Install in the reverse order