652 589 00 33 23
Hydraulic cylinder
Hydraulic hose (complete)
Hand pump
Adapter
652 589 00 33 21
715 589 15 34 00
715 589 12 34 00
715 589 12 33 00
Sleeve
Pulling device
Adapter
715 589 11 34 00
715 589 02 14 00
W26.40-1040-12
Shown on transmission 715.050
1 Fit guide sleeve (6) over countershaft.
2 Mount transmission housing rear section (4) on main shaft.
3 Install pull-on device (2) with 65 mm sleeve (3) on mainshaft.
4 Mount hydraulic cylinder (1) on pull-on device (2).
5 Press reverse gear (7) off countershaft (arrow).
6 Pull main shaft bearing in transmission housing-rear section (4) onto main shaft.
When pulling on ensure that the shift rail (5) slides into the transmission housing rear section (4) and the countershaft with the reverse gear (7) does not tilt over.