ar2640p0350mfa

Remove/install drive shaft radial shaft sealing ring

Type ar · emne 26.40 · version 0101 · 2019-05-13

Gælder for: Transmission 711.63 in model 118, 177, 247

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.40 Hus — Serie 118 · Serie 177 · Serie 247

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 118 · Serie 177 · Serie 247

Gælder også for motorer/gearkasser: 711 63*

AR26.40-P-0350MFA

Remove/install drive shaft radial shaft sealing ring

11.05.2019

Transmission

711.63 in model 118, 177, 247

Remove/install drive shaft radial shaft sealing ring

1

Radial shaft sealing ring

2

Front section of transmission housing

3

Drift

P26.40-2075-04

Caution

Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil

Wear protective gloves, protective clothing and safety glasses.
Do not pour transmission oil into beverage bottles.

AS00.40-Z-0001-01A

Remove/install

1

Remove central clutch release bearing.

AR26.40-P-0345MFA

2

Pry radial shaft sealing ring (1) out of transmission housing front section (2) using a suitable tool.


Carefully pierce radial shaft sealing ring (1) and pry it out.
The interference fits in the transmission housing will otherwise be damaged.

Installation: Replace radial shaft sealing ring (1) and moisten sealing lip with transmission oil.
Drive radial shaft sealing ring (1) all the way into transmission housing front section (2) using drift (3).

Drift

*711589131500

3

Clean sitting surface of radial shaft sealing ring (1) using a rag and check for damage.

If damage is found,

Replace transmission housing front section (2).

4

Install in the reverse order.

Remove/install drive shaft radial shaft sealing ring

711 589 13 15 00

Drift

Henviste dokumenter