AR26.30-T-6521B | Disassembling and assembling reverse gear stop bearing cover | 19.5.00 |
TRANSMISSION 714.120 /140 /668 /690 /692 in MODEL NMB613
TRANSMISSION 714.120 /140 /692 in MODEL NMB671
TRANSMISSION 714.120 /140 /692 in MODEL NMB613 with CODE (G63) "Control cable" gearshift
TRANSMISSION 714.120 /140 /668 /690 /692 in MODEL NMB613 with CODE (G62) "Manual" gearshift
TRANSMISSION 714.120 /140 /692 in MODEL NMB671 with CODE (G63) "Control cable" gearshift
TRANSMISSION 714.120 /140 /692 in MODEL NMB671 with CODE (G62) "Manual" gearshift
T26.60-0018-01
Shown on transmission 714.692
1 Reverse gear stop bearing cover
2 Compression spring
3 Circlip
4 Catch bolt
5 Cylindrical pin
6 Needle roller bearing
| Disassemble/assemble | ||
1 | Remove shift mechanism | Transmission 714.120/140/668/690/692 with "Manual" gearshift, code G62 | |
Transmission 714.120/140/692 with "Control cable" gearshift, code G63 | |||
2 | Remove needle roller bearing (6) from reverse gear stop bearing cap (1) | To do this, clamp reverse gear stop bearing cap (1) in a vise using aluminum soft vise jaws. | |
| |||
| |||
Assembly: Drive needle roller bearing (6) into reverse gear stop bearing cap (1) immediately using a drift until flush. | |||
| |||
3 | Remove locking ring (3) | ||
4 | Press out compression spring (2) and catch bolt (4) upwards using a screwdriver | ||
5 | Clean all parts, check for wear and replace defective parts | ||
6 | Assemble in reverse order |
000 589 27 33 00
Countersupport
Internal extractor
Drift
403 589 05 15 00
000 589 33 33 00