AR26.30-B-0310B | Remove/install rear transmission cover | 12.02.16 |
Manual transmission 714.120, 714.124, 714.140, 714.144
T26.30-0009-11
1 Gearbox rear cover - main shaft
2 Gearbox rear cover - countershaft
3 Speedometer sensor
4 Screw
5 O-ring seal
6 Sealing gasket
7 Pulse generator
8 Rev-counter sensor
| Removing and installing | ||
Danger! | Risk of injuries to skin and eyes from handling hot or incandescent objects | Use protective gloves, protective clothes and safety glasses. | |
1 | Remove the power output flange from gearbox | ||
2 | Remove the speedometer sensor (3) and the rev-counter sensor (8) from the rear cover - main shaft | ||
3 | Remove the main shaft rear cover (2) from the gearbox | Installing: Renew the O-ring. Apply sealing compound to mating surfaces. Replace the microencapsulated bolts | |
| |||
4 | Remove the rear cover from the countershaft (2) and the gasket (6) | Installing: Renew the sealing gasket. Replace the microencapsulated bolts | |
5 | Remove the pulse generator (7) from the main shaft | Installing: The pulse generator's blades must be pointing to the rear cover. | |
6 | Install in reverse order |
Cover
Número | Denominação | Gearbox 714.120/124. 714.140/144 | |||
BA26.30-B-1004-01H | Bolt (micro-encapsulated) of the secondary shaft rear cover | Hexagonal | Nm | 47 | |
Inside hexagonal | 58 | ||||
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1019-01A | Omnifit FD 10 sealing product | A 002 989 00 20 |