ar2619w0019hd

Remove/install splitter group solenoid valve

Type ar · emne 26.19 · version 0100 · 2014-04-22

Gælder for: TRANSMISSION 715.508 with CODE G1H (Transmission G 230-16/14.2-0.83) TRANSMISSION 715.518 with CODE G1I (Transmission G 231-16/17.0-1.0) TRANSMISSION 715.528 with CODE G1J (Transmission G 260-16/11.7-0.69)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.19 El-system gearkasse

EinPAS 17 Drivstreng/aksel › 17.35 Gearskifte/gearstyring › 17.35.13 ledning/slange/ventil

Gælder også for motorer/gearkasser: 715 508, 715 518, 715 528

AR26.19-W-0019HD

Remove/install splitter group solenoid valve

28.03.2014

TRANSMISSION	715.508
	with CODE G1H (Transmission G 230-16/14.2-0.83)
TRANSMISSION	715.518
	with CODE G1I (Transmission G 231-16/17.0-1.0)
TRANSMISSION	715.528
	with CODE G1J (Transmission G 260-16/11.7-0.69)

Remove/install splitter group solenoid valve

1	Electrical connector
2	Bolts
Y36	Splitter group solenoid valve

W26.60-1353-06

 	Remove/install
1	Relieve reservoir pressure at compressed air reservoir
2	Disconnect electrical connection (1) of splitter group solenoid valve (Y36)
3	Detach splitter group solenoid valve (Y36) at shift housing	 Installation: Replace O-rings.
		 Split solenoid valve to shift housing	*BA26.19-N-1010-01HA
4	Install in the reverse order

 Sensors/transmitters

Number	Designation		TRANSMISSION 715.508/518/528
BA26.19-N-1010-01HA	Split solenoid valve to shift housing	Nm	5