ar2619g0034ac

Remove/install rpm sensor for travel distance and speed

Type ar · emne 26.19 · version 0100 · 2018-02-19

Gælder for: Transmission 715.067 in model 800

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.19 El-system gearkasse — Serie 800

EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.12 Sensor/kontakt/ledningssæt — Serie 800

Gælder også for motorer/gearkasser: 715 067

AR26.19-G-0034AC

Remove/install rpm sensor for travel distance and speed

23.01.2018

Transmission

715.067 in model 800

Remove/install rpm sensor for travel distance and speed

B18

Travel and speed rpm sensor

W26.19-1214-06

Note on calculation of tightening torque when using insertion or socket tools with various effective lengths

AH00.00-P-0015-01CW

Remove/install

1

Disconnect electrical connector from travel and speed rpm sensor (B18)

2

Remove sealing cap from travel and speed rpm sensor (B18)

Installation: Replace sealing cap.

3

Remove travel and speed rpm sensor (B18)

Travel and speed rpm sensor to transmission

*BA26.19-N-1001-01NA

4

Install in the reverse order

5

Teach-in and calibrate travel and speed rpm sensor (B18)

Only if the travel and speed rpm sensor (B18) was replaced. In Germany as per §57b of German vehicle licensing regulations.

Sensors, transmitters

Number

Designation

Transmission 715.067

BA26.19-N-1001-01NA

Travel and speed rpm sensor to transmission

Nm

40

Henviste dokumenter