Attach/detach engine support fixture · ar2610s000601c · Mercedes-Benz WIS

AR26.10-S-0006-01C	Attach/detach engine support fixture
 Danger	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A

Model

415 with engine 200, 607, 608

 Frame

Number	Designation		Model 415
BA31.30-N-1001-01F	Screw/bolt, front crossmember to front longitudinal frame member	Nm	106

 Front axle carrier

Number	Designation		Model 415
BA33.10-N-1002-01D	Bolt, rear crossmember to longitudinal frame member	Nm	62

415 589 01 62 00

Engine bracket

415 589 02 62 00

Engine bracket

1	Remove bolts (1) of rear crossmember  .

S26.10-4512-01

S26.10-4511-08

Shown on engine 607

 The following separate parts from  engine bracket 415 589 01 62 00 are used:

 M10 threaded rods (3)

 M10 wing nuts (5)

 Support (7)

 Longitudinal member (C)

 The following separate parts from  engine bracket 415 589 02 62 00 are used:

 Threaded pin (2)

 260 mm spacer sleeves (4)

 Threaded connections (6)

 Nuts (8)

 Crossmember (A)

 Crossmember (B)

2	Screw threaded pins (2) into threads of screws of rear crossmember on vehicle.

3	Attach crossmember (A), as shown.

 Use suitable washers and secure using nuts (8).

4	Remove bolts of front crossmember  .

5	Screw M10 threaded rods (3) into threads of screws of front lower crossmember on vehicle.

6	Attach crossmember (B).

 To do so, fit 260 mm spacer sleeves (4) on front threaded rods M10 (3), attach crossmember (B) and secure using M10 wing nuts (5), as shown.

7	Position longitudinal member (C), as shown, and secure with threaded connections (6).

8	Attach support (7) to longitudinal member (C) and align relative to engine.

 Sit support brace (7) up against suitable support point.

9	Remove in the reverse order.