ar2610d002001c
Detaching and attaching transmission bearing bracket at transmission
Type ar · emne 26.10 · version 0101 · 1998-08-18
Gælder for: TRANSMISSION 711.612 in MODEL 901, 902, 903, 904 with ENGINE 111.979
Ikke tilgængelig på “da”; vises på Engelsk.
Placering
Funktionsgruppe 2 Chassis › 26 Manuel gearkasse › 26.10 Gearkasse komplet — Serie 901 · Serie 902 · Serie 903 · Serie 904
EinPAS 17 Drivstreng/aksel › 17.20 Gearkasse › 17.20.30 hus/dæksel/bundkar/ophæng — Serie 901 · Serie 902 · Serie 903 · Serie 904
Gælder også for motorer/gearkasser: 111 979, 711 612
AR26.10-D-0020-01C
| Detaching and attaching transmission bearing bracket at transmission
|
|
|
Engine mount, engine support
Number
| Designation
| Engine 111.979
|
|
|
|
|
|
|
|
|
|
|
|
|
BA22.10-N-1005-01H
| Rear engine support on transmission
|
| Nm
| 45
|
BA22.10-N-1006-01H
| Rear engine mount on engine support
|
| Nm
| 45
|
1 Unscrew nut (arrow) from transmission bearing bracket and slacken bolt (arrow) at rubber mount.
Installing: pay attention to tightening torque.
2 Raise transmission carefully, fold back bearing bracket and lower transmission again.
If insufficient clearance to floor panel, remove the breather cover from the gearbox.
3 Install in the reverse order.
