AR25.20-W-0200G | Remove and install clutch throwout lever | 12.7.10 |
MODEL 933
MODEL 930, 932, 934 except CODE (G02) Torque converter clutch (WSK)
W25.20-1081-05
1 Release lever
2 Plunger
3 Bearing sleeve
4 Retaining ring
5 Washer
6 Bearing sleeve
7 Bearing axis
8 Guide rollers
Arrows Bearing points
Modification notes
| Removing | ||
1 | Remove engine, transmission or turbo clutch with transmission | Select the procedure according to the setup and accessibility. | |
2 | Remove release lever (1) | ||
3 | Remove lifter (2) from release lever (1) | ||
| Checking | ||
4 | Check bearing bushing (3) of plunger (2) for wear and damage | If necessary, replace bearing bushing (3). | |
5 | Check bearing bushings (6), bearing shaft (7) and guide rollers (8) for wear and damage | If necessary, replace release lever (1) or disassemble release lever (1) and replace worn or damaged parts. | |
| Install | ||
6 | Install lifter (2) into release lever (1) | ||
7 | Install release lever (1) | Grease bearing points (arrows) lightly. | |
Vehicles without code (GK8) Turbo clutch | |||
Vehicles with code (GK8) Turbo clutch | |||
8 | Install engine, transmission or turbo clutch with transmission |
Clutch operating mechanism
Number | Designation | Engine 541.9, | |
BA25.20-N-1001-01B | Release lever to transmission | Nm | 75 |
BA25.20-N-1014-01B | Release lever to turbo clutch | Nm | 75 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1062-06A | Lubricating grease, Olista Longtime, DB supply specification 6804.60 | A 001 989 36 51 10 |