Remove/install central clutch operator · ar2520g0180na · Mercedes-Benz WIS

AR25.20-G-0180NA

Remove/install central clutch operator

26.1.11

ENGINE 902.912 in MODEL 405.210 /230
for USA/Canada only

ENGINE 906.936 in MODEL 405.210 /230
for USA/Canada only

ENGINE 906.967 in MODEL 405.210 /230 with CODE (M03) Increased engine output,
for USA/Canada only

G25.20-3102-01

1 Connection fitting

2 Vent fitting

3 Screw

4 Central clutch release bearing

B2 GS (EPS) clutch travel sensor

G25.10-3103-01

Modification notes

11.4.03

Step (coat splines on input shaft with grease) taken away

	Removing
1	Remove clutch housing		AR25.10-G-0040NA
2	Remove GS (EPS) clutch travel sensor (B2)
3	Detach connection fitting (1) and breather connection (2)
4	Remove bolt (3)
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
5	Remove central clutch release bearing (4)
	Install
6	Insert central clutch release bearing (4) and tighten bolts (3)	 Replace microencapsulated bolts (3).
			*BA25.20-N-1002-01I
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
7	Install connection fitting (1) and breather connection (2)	 Replace seals at connection fitting (1) and breather connection (2).
			*BA25.20-N-1001-01I
8	Install GS (EPS) clutch travel sensor (B2)
9	Install clutch housing		AR25.10-G-0040NA

 Clutch operating mechanism

Number	Designation		Engine 902.912, 906.936/967


BA25.20-N-1001-01I	Connection fitting/breather connection to central clutch operator	Nm	70
BA25.20-N-1002-01I	Bolt of central release bearing on clutch housing	Nm	16 (3)