ar2520d200001a

Removing and installing central clutch operator hydraulic line

Type ar · emne 25.20 · version 0100 · 2000-02-15

Gælder for: ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6 with TRANSMISSION 711.620 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6 with TRANSMISSION 711.605

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 2 Chassis › 25 Kobling › 25.20 Koblingsbetjening — Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

EinPAS 17 Drivstreng/aksel › 17.15 Kobling › 17.15.13 ledning/slange/ventil — Serie 901 (modeller 6**) · Serie 902 (modeller 6**) · Serie 903 (modeller 6**) · Serie 904 (modeller 6**)

Gælder også for motorer/gearkasser: 111 984, 711 605, 711 620

AR25.20-D-2000-01A

Removing and installing central clutch operator hydraulic line

Removing and installing central clutch operator hydraulic line

Clamp

000 589 54 37 00

Removing and installing central clutch operator hydraulic line

D26.10-1117-02

1 Clamp off hose of hydraulic line (1) using (2).

2 Detach bracket (3) of hydraulic line from transmission.

3 Remove clip (4) and pull hydraulic line off central clutch operator.

Collect escaping brake fluid.

Installation: Replace seal (5).

4 Install in the reverse sequence.