1 | Cover |
2 | Dust cap |
3 | Bleed screw |
D25.20-1104-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Caution | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
Topical note | Notes on externally invisible brake fluid loss | ||
Topical note | Brake fluid notes | ||
Bleeding | |||
1 | Unscrew cap from brake fluid reservoir. | ||
2 | Connect filling and bleeding unit to brake fluid reservoir. | ||
| 000 588 01 82 00 Filling unit | ||
Follow the operating instructions from the manufacturer and observe the ventilation pressure. | |||
3 | Raise vehicle. | ||
4 | Remove cover (1) and dust cap (2). | ||
5 | Open vent screw (3) on central clutch release bearing using socket wrench and drain off brake fluid. | Brake fluid must emerge clean and free of bubbles. Collect brake fluid in a suitable container. | |
Socket wrench | |||
6 | Close bleed screw (3). | Bleed screw to central clutch release bearing | |
7 | Install dust cap (2) and cover (1). | ||
8 | Lower vehicle. | ||
9 | Disconnect filling and bleeding unit from brake fluid reservoir. | ||
| 000 588 01 82 00 Filling unit | ||
| |||
Observe manufacturer's operating instructions. | |||
10 | Check brake fluid level in brake fluid reservoir and correct if necessary. | ||
| |||
11 | Seal brake fluid reservoir using cap. | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
12 | Perform engine test run, check clutch operation for proper operation and check for leak tightness. |
140 589 03 09 00
Socket wrench
Henviste dokumenter
- ah4210p940602a Oplysninger ved bremsevæsketab, som ikke er synligt udefra
- ah4250p000101a Oplysninger om bremsevæske
- ap4250d4210f Hydraulisk bremsesystem - kontrol og korrektion af væskestand
- ar0060d1000f
- as0000z000501a Fare for ulykke ved automatisk igangsætning når motoren kører. Fare for personskade på grund af knusning og forbrænding, hvis der arbejdes mens motoren startes eller kører
- as0000z001001a Livsfare, hvis køretøjet glider ned fra eller tipper på liften.
- as4250z000101a Risiko for forgiftning ved indtagelse af bremsevæske. Risiko for hud- og øjen-skader ved kontakt med bremsevæske
- as4900z000101a Forbrændings-, kvælnings- og forgiftningsfare ved arbejde på udstødningssystemet og dermed forbundne komponenter. Kvælningsfare og fare for forgiftning ved indånding af gasformede og faste komponenter i forbrændingsgassen. Fare for
- ws2500p0016b