AR25.19-W-0100C | Remove/install clutch travel sensor | 16.6.10 |
MODEL 374.5, 375.3, 958.2
without central clutch release bearing
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 except CODE (GE1) Automatic gear control (AGS)
without central clutch release bearing
W25.20-1031-12
1 Clutch servo assistance
2 Sealing ring
3 Intermediate flange
4 Electrical connector
5 Retaining plate
6 Bolts
B2 Clutch travel sensor
| Remove/install | ||
1 | Detach electrical connector (4) from clutch travel sensor (B2) | ||
2 | Turn clutch travel sensor (B2) until the bolts (6) are accessible | ||
3 | Remove bolts (6) | Installation: insert screws (6) with locking compound. | |
| |||
4 | Remove clutch travel sensor (B2) with intermediate flange (3) | Installation: Install new sealing ring (2). | |
5 | Remove clutch travel sensor (B2) from intermediate flange (3) | Remove retaining plate (5). | |
Installation: Replace sealing rings on clutch travel sensor (B2) | |||
6 | Install in the reverse order | ||
7 | Perform minor teach-in process | Only on vehicles with code (GS2) Gear control. |
Clutch booster
Number | Designation | Model | Model | |
BA25.20-N-1004-01J | Bolt, clutch travel sensor to clutch booster | Nm | 5 | 5 |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1008-02A | Quick-acting adhesive, Loctite 270 | A 002 989 93 71 |