ar2320w944003d

Remove, install drive gear on rear engine power take-off

Type ar · emne 23.20 · version 0100 · 2010-08-13

Gælder for: ENGINE 457.9 with CODE (N52) Rear engine power take-off, output torque 600 Nm ENGINE 457.9 with CODE (N53) Rear engine output for hydraulic pump

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 23 Specialindbygninger › 23.20 Motorudgang bagtil

EinPAS 17 Drivstreng/aksel › 17.45 Kraftudtag › 17.45.60 Aksel/tandhjul/synkronisering/flange

Gælder også for motorer/gearkasser: 457 9**

AR23.20-W-9440-03D

Remove, install drive gear on rear engine power take-off

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Rear engine power take-off

Number

Designation

Engine
457.9
with code N52

Engine
457.9
with code N53

BA23.20-N-1003-01I

Nut (double hexagon), drive gear to drive shaft

M331.5

Nm

500 (+50)

500 (+50)

Remove, install drive gear on rear engine power take-off
Remove, install drive gear on rear engine power take-off

457 589 01 63 00

Blocking device

Wrench socket

001 589 74 09 00

Remove, install drive gear on rear engine power take-off

W23.20-1067-02

Removal

1 Clamp blocking device (2) into vise.

2 Install rear engine power take-off (1) on blocking device (2) and tighten.

3 Unscrew nut (4) from drive gear (3) with socket.

4 Remove rear engine power take-off (1) from blocking device (2).

5 Remove drive gear (3) from drive shaft (5).

Remove, install drive gear on rear engine power take-off

W23.20-1067-02

Attaching

6 Push drive gear (3) onto drive shaft (5).

7 Screw new nut (4) to drive shaft (5).

Do not lubricate nut (4) and drive shaft (5).

8 Install rear engine power take-off (1) on blocking device (2) and tighten.

9 Tighten new nut (4) with socket .

10 Remove rear engine power take-off (1) from blocking device (2).

11 Wipe off thread locking compound oozing out from nut (4) with rag.

Henviste dokumenter