ar2320b9430tb

Remove/install rear engine power take-off.

Type ar · emne 23.20 · version 0109 · 2019-11-13

Gælder for: Engine 904.9 in model 958.0 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 906.9 in model 958.0 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 924.9 in model 958.0/1 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 926.9 in model 958.0/1 with code N52 (Rear engine power take-off, output torque 600 Nm) Engine 926.9 in model 958.2 with code N52 (Rear engine power take-off, output torque 600 Nm)

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 23 Specialindbygninger › 23.20 Motorudgang bagtil — Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 958 (modeller 0**, 1**, 2**)

EinPAS 17 Drivstreng/aksel › 17.45 Kraftudtag › 17.45.30 Kraftudtag komplet — Serie 904 (modeller 9**) · Serie 906 (modeller 9**) · Serie 958 (modeller 0**, 1**, 2**)

Gælder også for motorer/gearkasser: 924 9**, 926 9**

AR23.20-B-9430TB

Remove/install rear engine power take-off.

28.10.2019

Engine

904.9 in model 958.0

with code N52 (Rear engine power take-off, output torque 600 Nm)

Engine

906.9 in model 958.0

with code N52 (Rear engine power take-off, output torque 600 Nm)

Engine

924.9 in model 958.0/1

with code N52 (Rear engine power take-off, output torque 600 Nm)

Engine

926.9 in model 958.0/1

with code N52 (Rear engine power take-off, output torque 600 Nm)

Engine

926.9 in model 958.2

with code N52 (Rear engine power take-off, output torque 600 Nm)

Remove/install rear engine power take-off.

1

Rear engine power inlet

2

Seal ring

3

Activation flange

W23.20-1000-10

Remove/install

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut.

AS60.80-Z-0001-01A

1

Tilt the cab

2

Remove upper right and rear coating acoustic encapsulation

3

Remove transmission shaft on activation flange (3)

Only when a secondary major assembly has been installed.

.Drive shaft bolt to drive flange

*BA23.20-B-1004-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

4

Remove rear engine power inlet (1) on the distribution housing

Heat external part of distribution housing on the rear engine power inlet area (1) with a thermal blower.

Installation: Tighten M81.25 threaded retaining pin as an aid for the timing housing assemble.
Observe the master caliber for holes when compressing-in the engine rear power takeoff (1).

.Engine power take-off bolt to timing case

*BA23.20-B-1002-01A

5

Remove the sealing ring (2)

6

Install in reverse order

Engine power take-off, rear

Number

Designation

Engine 904.9, 906.9, 924.9 in Type 384, 693, 694, 695, 958 with Code N52 (engine take-off, rear, torque 600 Nm)

BA23.20-B-1002-01A

Engine power take-off bolt to timing case

Nm

25

Engine power take-off, rear

Number

Designation

Engine 904.9, 906.9, 924.9 in Type 384, 693, 694, 695, 958 with Code N52 (engine take-off, rear, torque 600 Nm)

BA23.20-B-1004-01A

Drive shaft bolt to drive flange

Nm

25

Henviste dokumenter