ar2210t1160c

Remove/install rear engine mount

Type ar · emne 22.10 · version 0106 · 2011-11-23

Gælder for: ENGINES 441.980 in MODEL 613.355 /364 /365

Ikke tilgængelig på “da”; vises på Engelsk.

Placering

Funktionsgruppe 1 Motor › 22 Aggregatophæng › 22.10 Aggregatleje, aggregatholder — Serie 441 (modeller 980) · Serie 613 (modeller 355, 364, 365)

EinPAS 15 Motor › 15.15 forbrændingsmotor komplet/motorblok/krumtapdrev › 15.15.20 motorophæng — Serie 441 (modeller 980) · Serie 613 (modeller 355, 364, 365)

AR22.10-T-1160C

Remove/install rear engine mount

11.11.11

ENGINES 441.980 in MODEL 613.355 /364 /365

Remove/install rear engine mount
Remove/install rear engine mount

T22.10-0022-01

Viewed from the top:

1 Engine mount

2 Central screw/bolt, engine mount

View from below

3 Stop bow

4 Fastening screw/bolt, engine mount to engine bearing bracket

T22.10-0023-01

Remove/install

1

Open engine compartment flaps

2

Support engine and transmission

Shim and secure using a suitable transmission jack or inspection pit lift.

Engine support device, engine hoist
gotis://A_01_09.0

3

Remove center bolt (2) on engine mount (1)

*BA22.10-N-1006-01J

4

Lift engine a little

Until the engine mount is totally relieved.

5

Remove mounting bolts (4) on engine mount (1)

*BA22.10-N-1007-01J

6

Remove engine mount (1)

7

Remove stop bow (3) from engine mount (1)

Installation: Set clearance for stop bow:

Align engine mount

AP22.10-T-2260B

8

Install in the reverse order

Engine mounts, engine supports

Number

Designation

Engines 447, 489

BA22.10-N-1006-01J

Screw/bolt, engine mount to rear cross member

Nm

128

BA22.10-N-1007-01J

Screw/bolt, engine mount to rear engine mount bracket

Nm

64

Henviste dokumenter