Remove/install left engine support · ar2210s4350se · Mercedes-Benz WIS

AR22.10-S-4350SE

Remove/install left engine support

24.6.10

ENGINES 642 in MODEL 639

S22.10-4519-12

1 Screw

2 Engine support

3 Bolts

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Remove engine air intake duct downstream of air filter		AR09.10-S-8130SE
2	Remove fan from fan drive	 Lay fan wheel in the radiator shroud.	AR20.40-S-5614SE
3	Remove engine covers		AR01.10-S-2405SE
4	Remove engine mount bolts		*BA22.10-N-1001-01O
5	Put on engine support clamp	 Lift engine carefully to avoid causing damage.	AR33.10-S-0100-01S
		 Installation: The anti-twist lock (2) on engine mount must be seated in planned cutout of engine support.
			*BA01.20-N-1003-01O
			*BA62.30-N-1006-01A
		 Engine hoist	*639589006100
		 Strut	*639589016300
		 Strut	*906589036100
6	Remove bottom engine compartment paneling	Only on model 639.7/8 as of vehicle identification number (VIN) 055347	AR61.20-S-1105S
7	Remove bolt (1)		AR09.41-S-8623SE
8	Remove engine supports (2)	 To do this, remove bolts (3).
		 Installation: Replace the bolts (3).
			*BA22.10-N-1005-01O
9	Install in the reverse order

 Crankcase ventilation, cylinder head cover

Number	Designation			Engine 642


BA01.20-N-1003-01O	Bolt, bracket to cylinder head	M612	Nm	9

 Engine mounts, engine supports

Number	Designation			Engine 642 in model 639


BA22.10-N-1001-01O	Bolt connecting front engine mount to engine support		Nm	58
BA22.10-N-1005-01O	Bolt connecting engine support to left crankcase	Stage 1	Nm	20
		Stage 2	°	90

 Crossmember and front reinforcement

Number	Designation			Model 636, 639


BA62.30-N-1006-01A	Bolt, frame to front module reinforcement	M8	Nm	25

639 589 01 63 00

Strut

Engine lifting fixture

639 589 00 61 00

906 589 03 61 00