Remove/install engine mount or engine crossmember at the rear

AR22.10-P-1180OLF

22.06.2017

Engine

651 in model 222

P22.10-2452-06

 	Remove/install
1	Remove rear section of lower engine compartment paneling		AR61.20-P-1105LF
2	Support transmission
	000 588 11 62 00 Major assembly mount		WS01.00-P-0092B
	000 588 10 62 00 Support plate		WS26.00-P-3309B
	Perform operation steps 3 to 5 when removing the rear engine mount (7)
3	Remove screw/bolts (4)	 Rear engine mount on engine support	*BA22.10-P-1004-03K
4	Lift transmission by about 10 mm
5	Remove screw/bolts (6) and remove engine mount (7) to the rear	 Bolt, rear engine mount to bracket/transmission	*BA22.10-P-1003-03K
	Perform operation steps 6 to 9 for removal of the engine crossmember (5)
6	Remove screw/bolts (2s) and take off exhaust bracket (1)
7	Remove screw/bolts (4)	 Rear engine mount on engine support	*BA22.10-P-1004-03K
8	Lift transmission by about 10 mm
9	Remove screw/bolts (3s) and take off engine crossmember (5)	 Never use an impact wrench/driver or compressed air tools for screwing in or unscrewing the screw/bolts (3)! Otherwise the threads can get damaged.
		 Screw/bolt, rear engine support to frame floor assembly	*BA22.10-P-1005-03K
10	Install in the reverse order

 Engine mount, engine support (engine side)

Number	Designation			Model 222 except code Z07 (Top protection)	Model 222 with code Z07 (Top protection)
BA22.10-P-1003-03K	Bolt, rear engine mount to bracket/transmission	M8	Nm	30	30
		M10	Nm	50	50

 Engine mount, engine support (engine side)

Number	Designation		Model 222 except code Z07 (Top protection)	Model 222 with code Z07 (Top protection)
BA22.10-P-1004-03K	Rear engine mount on engine support	Nm	30	30

 Engine mount, engine support (engine side)

Number	Designation			Model 222 except code Z07 (Top protection)	Model 222 with code Z07 (Top protection)
BA22.10-P-1005-03K	Screw/bolt, rear engine support to frame floor assembly	Stage 1	Nm	80	80
		Stage 2: Loosen	°	-	360
		Stage 3	Nm	-	120