Remove/install upper engine stabilizer mount

AR22.10-P-1145MFF

Remove/install upper engine stabilizer mount

29.11.2019

Engine

654 in model 118, 177, 247

1

Electrical wiring harness

2

Engine mount

3

Screw

4

Screw

5

Engine stabilizer mount

 Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

 Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Notes on coolant level

AH20.00-P-1142-01CW

 

Remove/install

1

Remove upper engine cover.

AR01.10-P-2405MFF

2

Remove bleed line from coolant expansion reservoir and place the coolant expansion reservoir with connected coolant hoses to one side.

AR20.30-P-4949MFF

3

Unclip electrical wiring harness (1) from engine mount (2) and place to one side.

 Clip remover

*452589016300

4

Remove screw (3).

 Screw, engine mount engine stabilizer mount at top to body

*BA22.10-P-1007-03P

5

Remove screw (4) and then engine stabilizer mount (5).

 Installation: Ensure that guide pin (arrow) is correctly seated in the elongated hole of upper engine stabilizer mount (5).

 Screw, engine stabilizer mount at top to engine mount

*BA22.10-P-1006-03P



Check

6

Check engine stabilizer mount (5) for damage.

If damage is detected on engine stabilizer mount (5),



Replace engine stabilizer mount (5).

AR22.10-P-1102MFF

7

Install in the reverse order.

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1006-03P

Screw, engine stabilizer mount at top to engine mount

Nm

130

 Engine mount, engine support (engine side)

Number

Designation

Model 118, 177, 247

BA22.10-P-1007-03P

Screw, engine mount engine stabilizer mount at top to body

Nm

106