Removing and installing front engine mount

AR22.10-L-4330VA

24.10.01

ENGINE 668.914 in MODEL 414.700

L22.10-0011-09

1 Right front engine mount

2 Right front engine mount

3 Bolt

4 Nut

9 Charge air hose

10 Hose clamp

11 Hose clamp

5 Right front engine support

6 Left front engine support

7 Oil lines (automatic transmission)

8 Bolt

 	Remove/Install
1	Remove washer fluid reservoir	 Press off windshield washer fluid pump with lines connected. Installation: Check sealing ring and replace if necessary.
2	Unfasten hose clamps (10, 11) and detach charge air hose (9)
3	Remove front bumper		AR88.20-L-2000VA
4	Unscrew bolt (8).	 Only on vehicles with automatic transmission.
5	Raise engine	 Raise engine until the weight of the engine is no longer acting on the engine mounts.	AR22.10-L-1260-01VA
			*WE58.40-Z-1007-11A
6	Remove bottom section of sound-proofing capsule	 Only remove front engine compartment paneling.	AR94.30-L-5300VA
7	Unscrew nuts (4)		*BA22.10-P-1006-01I
8	Unscrew bolts (3)		*BA22.10-P-1005-01I
9	Remove right front engine mount (1) and left front engine mount (2) upwards	 Environmental protection regulations for disposal of engine mounts. Dispose of engine mounts as mixed scrap.  Only the left engine mount (2): Press oil lines (7) to the side.  Installation: The installation positions of the engine mounts (1, 2) are defined by locating pins on the engine supports (5, 6).
10	Install in the reverse order

 Engine mounts, engine supports

Number	Designation		Engine 668.914


BA22.10-P-1005-01I	Bolt of engine carrier to engine mount	Nm	55
BA22.10-P-1006-01I	Nut, front engine mount to front axle carrier	Nm	40

Workshop equipment

WE58.40-Z-1007-11A

Engine lifting fixture